ATS Electro-Luber™ - Original Single Point - 125cc Mini-Luber

ATS Electro-Luber™ - Original Single Point - 125cc Mini-Luber

Buy now at only:
$ 50.95 *Please call us for special pricing

  • Application | Single Point
  • Size | 4 oz capacity (125 cc)
  • Technology | Safe, Inert Nitrogen gas powered
  • Dispensing Power |Up to 50 PSI Can be remotely mounted up to 3 ft
  • Cycle |Single Use, Disposable
  • LED Indicators |  Positive verification unit is working
  • Operating Span | 14 days to 1 year on factory-filled unit
  • Select lubricant below
    Once filled, items are considered custom and non-returnable


      The classic Electro-Luber™ was developed in 1982. The Electro-Luber™ uses an electrochemical reactor cell that converts electrical energy into safe, inert nitrogen gas. The gas is trapped in a hermetically sealed bellows-type gas chamber. As the gas is produced an internal pressure builds up in the bellows and is applied against the orange piston. The piston then forces the lubricant out of the cylinder and into the point of lubrication. The unit can empty between 15 days to 1 year depending on the setting of the simple user-programmable DIP switch. The selection can be changed or turned off at any time.


      • Size | 4 oz capacity (125 cc)
      • Temperature Range: -4°F to +131°F (-20°C to +55°C)
      • Dispensing Power | Up to 50 PSI
      • Set to empty in 15 days or up to 1 year 

      Support PDF

      Original Spec Sheet

      Original Installation Instructions

      Fill Log

      Frequently Bought Together