ATS Electro-Luber™ - Original Single Point - 60cc Micro-Luber

ATS Electro-Luber™ - Original Single Point - 60cc Micro-Luber

Buy now at only:
$ 50.95 *Please call us for special pricing

  • Application | Single Point
  • Size | 2 oz capacity (60 cc)
  • Technology | Safe, Inert Nitrogen gas powered
  • Dispensing Power |Up to 50 PSI Can be remote mounted up to 3 ft
  • Cycle |Single Use, Disposable
  • LED Indicators |  Positive verification unit is working
  • Operating Span | 14 days to 1 year on factory filled unit
Select lubricant below
Once filled, items are considered custom and non-returnable


    The classic Electro-Luber™ was developed in 1982. The Electro-Luber™ uses an electro-chemical reactor cell that converts electrical energy into safe, inert nitrogen gas. The gas is trapped in a hermetically sealed bellows-type gas chamber. As the gas is produced an internal pressure builds up in the bellows and is applied against the orange piston. The piston then forces the lubricant out of the cylinder and into the point of lubrication. The unit can empty between 15 days to 1 year depending on the setting of the simple user-programmable DIP switch. The selection can be changed or turned off at any time.


    • Size | 2 oz capacity (60 cc)
    • Temperature Range: -4°F to +131°F (-20°C to +55°C)
    • Dispensing Power | Up to 50 PSI
    • Set to empty in 15 days or up to 1 year 

    Support PDF

    Original Spec Sheet

    Original Installation Instructions

    Fill Log

    Frequently Bought Together